Vertical Communications GCA70-248 - Manual (Page 57)

Feature Buttons
If you find that you are using certain miscellaneous features often, access buttons for
these features may make operation easier. Some examples of common feature
buttons include:
· Account Code Button
—allows you to enter an account code for call
record purposes.
· Automatic Call-Back (Camp On) Button
—arranges the system to
ring your and another’s telephones as soon as their telephone becomes
idle.
· Call Forward Button
—provides one-button forwarding of all of your
calls to another telephone.
· Call Park Orbit Button
—places a call in a system hold for pick up.
· Do Not Disturb Button
—prevents other telephones from ringing your
telephone.
· Page Button
—provides one-button access to paging.
· Privacy Button
—releases privacy for current call.
· Saved Number Redial Button
—redials saved last-dialed number.
· Voice-Announce Block Button
—blocks voice announcements.
You can store feature access codes at programmable buttons to provide yourself
with one-button access to features that you use quite often. To find your feature code
of interest, refer to Appendix A on page 65.
· To manually store an access code,
1. PRESS
INTERCOM.
2. DIAL
**3
.
3. PRESS programmable button to choose storage location.
4. DIAL access code for feature.
5. LABEL button location.
6. PRESS next location button and store next feature code.
7. REPEAT previous steps until all desired feature codes are stored.
8. PRESS
SPEAKER to end.
Non-LCD Speakerphone Station User’s Guide 49
GCA70-248 Programming