Vertical Communications GCA70-248 - Manual (Page 33)

Automatic Dialing
Automatic dialing provides one- or two-button speed dialing using programmable
buttons at which you have previously stored numbers. There are two types of speed
dial numbers: (1) numbers that you store for your own use (personal speed dial
numbers and autodial numbers), and (2) numbers that the system attendant stores for
everyone’s use (system speed dial numbers).
NOTE: When you call from a station not equipped with a speaker (for
example, 8112N and 8212N) you must LIFT the handset AND PRESS
TAP
before initiating any automatic dialing activity.
· To automatically dial a speed dial number stored at one of
the programmable buttons on your station, choose one of
the following:
1. PRESS programmed speed dial button (line selection is usually a
part of the stored speed dial number).
2. PRESS
SHIFT AND programmed speed dial button (to choose
number stored as second choice at that button).
· To speed dial a personal speed dial number stored at the
dial pad,
1. DIAL speed dial number on dial pad (
0
to
9
).
NOTE: If you are already on a line, you must press
SHIFT before dialing the
personal or system speed dial numbers that are stored at the dial pad. Also,
if a speed dial number’s preselected line is in use, the speed dial will not
engage.
· To speed dial a system speed dial number stored at the dial
pad,
1. DIAL
*
AND system speed dial number.
Non-LCD Speakerphone Station User’s Guide 25
GCA70-248 Making Calls