Vertical Communications GCA70-248 - Manual (Page 53)

Programming
DSS Numbers
Storing another station at a DSS/BLF programmable location on your telephone
allows you to monitor that station, dial with the press of one button, or pick up or
hold calls at that station quickly and conveniently.
· To store an intercom extension number as a
DSS number,
proceed as follows:
NOTE: Storing
DSS numbers at button locations will overwrite any previously
stored numbers.
1. PRESS
INTERCOM.
2. DIAL
**3
.
3. PRESS programmable button to choose location.
4. DIAL extension number.
5. PRESS next location button AND STORE next
DSS number.
6. REPEAT the previous step until all
DSS numbers are stored, OR
PRESS
SPEAKER to end.
CAUTION
Do not attempt to program interactive buttons; doing so causes the system to
make features unavailable. If interactive buttons are inadvertently pro-
grammed, you can retrieve their original functions in the following manner:
1. PRESS
INTERCOM AND DIAL
**1
2. PRESS desired interactive button to reprogram
3. DIAL
91
,
92
, or
93
to program buttons from left to right.
Non-LCD Speakerphone Station User’s Guide 45
GCA70-248 Programming
6