Vertical Communications GCA70-248 - Manual (Page 35)

Redial Programming (Storing Numbers)
You can permanently store a number at any programmable button location that does
not currently have a number or feature associated with it. (For programming of a
SAVED NUMBER REDIAL button at your station, refer to Feature Buttons section
on page 49.)
· To permanently store a number you’ve just dialed,
1. DIAL number.
2. PRESS programmed SAVED NUMBER REDIAL button.
· To dial the saved number,
1. PRESS
SPEAKER OR LIFT handset if privacy desired.
2. PRESS button where number is saved, OR PRESS programmed
SAVE NUMBER REDIAL button.
Sending Subdued Off-Hook
Voice Announcements (SOHVA)
You can make a private voice announcement to another station that is off-hook and
busy on a call if the system is arranged to provide this feature. (See page 50 for
instructions on programming a dedicated SOHVA button.)
· Make a SOHVA announcement using the SOHVA button as
follows:
1. MAKE intercom call AND HEAR busy tone. If called station is
on outside line, ring-back tone is heard, but SOHVA is still
available.
2. PRESS programmed SOHVA button AND HEAR several quick
tone bursts.
3. MAKE announcement (busy tone means that the called telephone
is in station mode and you cannot make announcement, that your
SOHVA has been denied through system programming, or that
the called party has blocked your SOHVA).
4. WAIT on line for reply.
Non-LCD Speakerphone Station User’s Guide 27
GCA70-248 Making Calls