Conair 100 - Manual (Page 103)

A p p e n d i x l C - 4
C l e a n i n g t h e A f t e r c o o l e r
( c o n t i n u e d )
5 Remove the aftercooler assembly from the aftercooler housing.
6 Clean the aftercooler assembly using a mild soap and water. Let the after-
cooler dry thoroughly before installation.
CAUTION: During the cleaning process, DO NOT cut or remove the stainless
steel wire that holds the aftercooler assembly together.
7 Inspect the condition of the gasket. If it is damaged, replace the gasket.
8 Reassemble by repeating the steps in reverse order.
(continued)