Conair 100 - Manual (Page 124)

G - 1 4 l A p p e n d i x
To S t o p C o n v e y i n g
1 Set the load time to zero. Once the load time is set to zero, conveying will
stop. See page 4-6, Screen 9
Tr a n s p o r t i n g t h e M D C
The MDC can be moved to another processing machine, to a pre-drying area, or to
an area away from the processing machine for cleaning and maintenance. To trans-
port safely:
1 Disconnect the power and water sources.
2 Place the vacuum receiver on its transport bracket on the MDC cart.
Tighten the thumbscrew to secure the vacuum receiver to the bracket.
3 Unlock the wheels and move the MDC by pushing or pulling with the
handles on the cart.
Central
When configured as
a central dryer, the
MDC option is not
available.