PRG Mbox Designer Manual 3.9 - Manual (Page 101)

MBOX ® MEDIA SERVER USER MANUAL 93
Fit To Screen
The Fit To Screen animated gobo can be used to force any content to fill the screen in one of three ways: Horizontal,
Vertical, Horizontal & Vertical. The layer's scale parameter must be at their default values for the fill to work correctly.
The FIt To Screen gobo requires no lighting.
The A modifier selects the fill mode:
+ 0 - 63: Image is scaled so both width and height are >= screen size (i.e. the smaller dimension is scaled to fill, so
the larger dimension overfills the screen and is cropped). The image aspect ratio is not affected.
+ 64 - 127: Image is scaled so height = screen size (image width may be bigger or smaller than the screen width).
The image aspect ratio is not affected.
+ 128 - 191: Image is scaled so width = screen size (image height may be bigger or smaller than the screen height).
The image aspect ratio is not affected.
+ 192 - 255: Image is scaled in both X and Y so width and height = screen width and height exactly. In this case, the
image aspect ratio will probably change.
Note: Depending on the aspect ratio of the screen vs. the content, the range of 0-63 may look the same as either
64-127 or 128-191.
Training Video: Mbox Media Server Training Video Chapter 18: 3D Functionality
Horizontal
Vertical
Horizontal and Vertical