PRG Mbox Designer Manual 3.9 - Manual (Page 18)

10 MBOX ® MEDIA SERVER USER MANUAL
Auxiliary Input Panel
The Auxiliary Input panel provides input/output connectors for signals other than video and DMX/Art-Net.
+ Ethernet - This port is used when networking multiple Mbox Extreme servers together.
+ Audio Out - The XLR audio outputs are balanced. The mini plug audio output is unbalanced.
+ SMPTE In - The SMPTE input will accept balanced or unbalanced signals.
+ MIDI In/Out - The MIDI input currently accepts MIDI timecode.
+ SDI Video Inputs - These ports will accept SDI (SD/HD), component, or composite video signals as indicated in
the illustrations below. Note that the v3.5 hardware will only accept SDI (SD/HD).
Figure 1-5: Mbox Extreme Auxiliary Input Panel
Training Video: Mbox Media Server Training Video Chapter 3: Hardware Set Up – Rear
BALANCED AUDIO OUT
RIGHT
MIDI IN
(COMPOSITE)
Y IN SDI IN R - Y IN B - Y IN
ETHERNET LEFT
MIDI OUT
SMPTE IN
Balanced XLR Audio Out
(Left and Right) MIDI
In
MIDI
Out
Y Input
(composite)
Ethernet
Port
SMPTE
SDI (SD/HD)
Input
R-Y Input
B-Y Input Unbalanced Mini Plug Audio Out
(3.5mm Mini Jack)
In
Auxiliary Panel Detail (v3)
SDI 1
2 3 4 1
MIDI OUT MIDI IN
SMPTE IN RIGHT LEFT ETHERNET
BALANCED AUDIO OUT
UNBALANCED
AUDIO OUT
Balanced XLR Audio Out
(Left and Right) MIDI
In
MIDI
Out
Ethernet
Port
SMPTE
In
Auxiliary Panel Detail (v3.5)
SDI (SD/HD) Inputs
Unbalanced Mini Plug Audio Out
(3.5mm Mini Jack)