PRG Mbox Designer Manual 3.9 - Manual (Page 197)

MBOX ® MEDIA SERVER USER MANUAL 189
DMX Layer Volume Control
When using DMX Layer Volume control, the layers don't
have to be controlled by the same universe, or using
consecutive addresses.
Chan Size Function Default Snap
1 1 Layer 1 volume 255 N
2 1 Layer 2 volume 255 N
3 1 Layer 3 volume 255 N
4 1 Layer 4 volume 255 N
5 1 Layer 5 volume 255 N
6 1 Layer 6 volume 255 N
7 1 Layer 7 volume 255 N
8 1 Layer 8 volume 255 N
9 1 Layer 9 volume 255 N
10 1 Layer 10 volume 255 N
11 1 Layer 11 volume 255 N
12 1 Layer 12 volume 255 N
Draw Mode
Values Mode Description
0 NONE no effect
1 Light/Trim
automatic ambient lighting of
object/trims edge of backgrounds
2 Cut cuts holes in stencil mask
3 Cut + Light as above w/ lighting
4 Cut & Draw
as mode 2 but texture is drawn on
object too
5
Cut & Draw +
Light
as above w/ lighting
6
Draw thru
Stencil
this layer's texture is drawn where
holes have been cut in stencil
7
Draw thru
Stencil + Light
as above w/ lighting
8
Draw onto
Stencil
this layer's texture is drawn where
stencil is not cut
9
Draw onto
Stencil + Light
as above w/ lighting
16
Orthographic
Projection
shows 3D object in ortho mode
32 Additive
layer’s colors are added to
underlying colors (blacks appear
transparent)
64 Screen
similar to above, with less of
underlying color (blacks appear
transparent)
96 Multiply
multiplies layer’s color with
underlying color (blacks appear
opaque)
128 Subtractive
layer’s colors are subtracted from
underlying colors (blacks appear
transparent)
160 Exclusion
underlying colors are inverted
where layer color is lighter; layer’s
colors are then added to
underlying colors (blacks appear
transparent)
192
Invert
Subtractive
underlying colors are subtracted
from layer’s colors (blacks appear
opaque)
224 Invert Additive
layer’s colors are inverted and are
added to inverse of underlying
colors (blacks appear transparent)