PRG Mbox Designer Manual 3.9 - Manual (Page 63)

MBOX ® MEDIA SERVER USER MANUAL 55
APPLICATION WINDOW
Overview
The Mbox application window allows the server’s output to be viewed in either Window or Fullscreen mode on the
preview monitor.
Fullscreen - While in Fullscreen mode, the server’s output (i.e., video) will be displayed at "full screen" without any
user interface showing. In this mode, the output will also be visible on the Stage output of the Dual I/O module.
Window - While in Window mode, the application’s user interface will be displayed. In this mode, the output will NOT
be visible on the Stage output of the Dual I/O module. The Window mode interface contains two tabs: Mbox and
Setup as shown in the sample screen below:
The function of the two Window mode tabs is as follows:
+ Mbox tab - used for previewing the server’s video output.
+ Setup tab - used to configure the server. Refer to "Setup" on page 56 for more details.
CAUTION! While in Window mode, there is no visible output from the Dual I/O stage outputs. (A video signal still
exists, but the output is blacked out.)
Fullscreen Mode Window Mode
Output to: Preview (Monitor) and Stage Output to: Preview (Monitor) only