Playout, Restart, Playout restart – PRG Mbox Designer Manual 3.9 User Manual
Page 86
78
MBOX
®
MEDIA SERVER USER MANUAL
+
The SMPTE Kiosk mode requires the use of the MediaTimeCodes.plist for assignment of start times for the
individual files (refer to
"Linking Files to Timecode (Method 1)"
on page 109. It is not compatible with the TC DMX
Controls.
Playout
Playout modes can be used on bump buttons, such as the Restart mode.
5 Seconds - playback position will skip ahead to five seconds from the end of the movie.
10 Seconds - playback position will skip ahead to ten seconds from the end of the movie.
15 Seconds - playback position will skip ahead to fifteen seconds from the end of the movie.
20 Seconds - playback position will skip ahead to twenty seconds from the end of the movie.
30 Seconds
- playback position will skip ahead to thirty seconds from the end of the movie.
The playout points can be modified using the preferences available in the Mbox Remote application. The preference is
called "Playout Points" and the format is in whole numbered seconds (five separate values). (Refer to the Mbox
Remote User manual for more information.)
Restart
Restart Movie from In-Frame - This playmode always returns the playhead to the current In-Frame point. The
Playmode value should be returned to its prior value after a restart is triggered.