PRG Mbox Designer Manual 3.9 - Manual (Page 142)

134 MBOX ® MEDIA SERVER USER MANUAL
There is a Control Test Value slider on the main window that changes scale based on the selected control's
data format, and allows you to test linear controls (e.g., position, opacity) within the MultiScreen Editor
application. If you look at the Preview window, the text field at the top will show you both the screen object's
location and the texture location. As you move the slider, you should be able to see these values change and
also check to see if the direction is correct.
Step 16. Now you can go ahead and add eight more screen objects by copying and pasting the one screen object
you have just configured. Make sure to use the correct Active and Texture origins and Width & Height from
the chart on
page 130 , and also to substitute the correct address for each control. You should end up with
what you see below: