Toa VM-3000 Series User Manual
Page 15
15
54. Control Output Terminals 1 – 8 [CTRL OUT 1
– 8, G]
Control output terminals for general broadcasts.
Operations assigned to each contact output are
determined by software settings. (For details,
refer to "Event Settings" in the separate software
manual.)
55. Control Input Terminals 1 – 8 [CTRL IN 1 – 8, G]
Control input terminals for general broadcasts.
Functions assigned to each contact input are
determined by software settings. (For details,
refer to "Event Settings" in the separate software
manual.)
56. Audio Input 4 Terminals [INPUT 4]
(VM-3240VA and VM-3360VA only)
Electronically-balanced 600 Ω, –10 dB* / –50 dB,
screw terminal. Use DIP switch (40) for
LINE/MIC switching.
*
0 dB = 1 V
57. Remote VOL Terminals 1 & 2 [REMOTE VOL]
Not used.
58. Input 4 Volume Control
(VM-3240VA and VM-3360VA only)
Adjusts the audio input terminal 4’s (56) input
volume.
59. External Amplifier Link Connector [EXT. PA
LINK]
Connects to the VP-2241 or VP-2421 standby
amplifier’s PA Link connector.
60. VM Link Connector [VM Link Out]
Connects to the VM-3240E’s or VM-3360E’s VM
Link In connector.
61. LAN Connector [LAN]
(VM-3240VA and VM-3360VA only)
Connects to a PC.
62. Remote Microphone Link Connectors 1 & 2
[RM1 LINK IN, RM2 LINK IN]
(VM-3240VA and VM-3360VA only)
Connect the RM-300MF Fireman’s Microphone
or RM-200M Remote Microphone to these
connectors.
63. DIP Switch (VM-3240E and VM-3360E only)
Used for unit ID and equipment settings.
DIP Switches 1 & 2 [LOCAL INPUT]
Not used. Default setting: OFF
DIP Switches 3 – 6 [EXTENSION UNIT NO.]
Used for unit ID settings for the VM-3240E and
VM-3360E. (Refer to
for ID settings.)
Default settings: ON (Switch 3), OFF (Switches 4
– 6)
DIP Switch 7 [FIRMWARE]
Set this switch to ON to enable firmware version
updates, and OFF to prohibit the update.
Default setting: ON
DIP Switch 8 [CONFIG]
Not used.
Default setting: ON
64. Local Input Terminals [LOCAL INPUT]
(VM-3240E and VM-3360E only)
Local broadcast can be made when this terminal
is used in conjunction with the Control Input
terminals (55).
(This function can be used only when all the
versions of VM-3000VA firmware, VM-3000E
firmware, and VM-3000 Setting Software are
2.00 or later. For details, refer to "6. SYSTEM
SETTINGS; 6.8. Local Input Setting" in the
separate software instruction manual.).
65. Local Input Volume Control
(VM-3240E and VM-3360E only)
Adjusts the input volume of the equipment
connected to the Local Input terminal (64).
66. LAN Connector [LAN]
(VM-3240E and VM-3360E only)
Not used.
67. VM Link In Connector [VM LINK IN]
(VM-3240E and VM-3360E only)
Connect this connector to the VM-3240VA’s or
VM-360VA’s VM LINK OUT connector. When
using two or more VM-3240Es or VM-3360Es,
connect this connector to other VM-3360E’s or
VM-3360E’s VM LINK OUT.
68. Local Remote Microphone Link Connector
[LOCAL RM LINK IN]
(VM-3240E and VM-3360E only)
Not used.
69. PA Link Connector [PA LINK]
Not used.