Toa VM-3000 Series - Manual (Page 34)

34
Step 3. Make announcement while pressing the emergency microphone’s Talk key.
During emergency microphone announcements, the Emergency
Microphone Operation indicator and Output indicator both light red.
At the same time, the "EMERGENCY VA MICROPHONE" indication
is displayed on the LCD.
Talk key
Step 4. To terminate the emergency broadcast, reset the emergency mode using one of the following
methods:
• Press the Reset key on the front panel of the
VM-3360VA or VM-3240VA.
• Press the RM-300MF Fireman’s Microphone
Emergency Reset key.
Note
The Emergency Reset indicator (red) remains lit
while the Emergency Reset key is pressed.
• Input a reset signal to the Emergency Control
Input terminals of the VM-3240VA, VM-3360VA,
VM-3240E, or VM-3360E which has been
assigned a reset function.
Note
Use the setting software to assign the reset
function to the Emergency Control Input
terminal. (Refer to "Emergency Control Input
Settings" in "Event Settings" in the separate
software instruction manual.)
Reset key
[VM-3240VA/3360VA]
MIC SP CPU
OFF ON
Emergency Reset
key
Emergency Reset
indicator
[RM-300MF]
Emergency Control Input terminals
[VM-3240VA/3360VA/3240E/3360E]
Note: This figure represents the VM-3240VA/3360VA.
E M E R G E N C Y
V A M I C R O P H O N E