Toa VM-3000 Series - Manual (Page 92)

92
Wall mount bracket unit for the RM-300MF ................................. 1 (supplied with the RM-300MF)
Tapping screw 4 x 25 (for wooden wall mounting) ...................... 2 (supplied with the RM-300MF)
13. INSTALLATION
13.1. Installing the RM-300MF on a Wall
To mount the RM-300MF on the wall, the following parts are required.
• Install the unit only in a location that can structurally support the weight of the unit and the
mounting bracket. Doing otherwise may result in the unit falling down and causing personal
injury and/or property damage.
• Be sure to install the bracket on the wall using 2 screws.
WARNING
Wall mount bracket unit
(supplied with the RM-300MF)
RM-300MF
46
100
92
ø4.5
3-4.5 x 6.5
RM-300MF's center line
83.5
107.6
215
ø60
Wall mount bracket unit for the RM-300MF
Use 2 mounting holes indicated by
arrows to secure the bracket unit.
Wall mount bracket unit's center line
9.7
Unit: mm
Step 1. Install the wall mount bracket unit supplied with the RM-300MF on the wall.
Install the unit on the wall using 2 screws.
The RM-300MF comes with 2 tapping screws (4 x 25) for direct wall mounting.
However, if these supplied screws are not appropriate for the mounting, prepare appropriate ones
separately.
[Installation]