VACUUBRAND PC 3001 VARIOpro emission condenser Peltronic - Manual (Page 102)

page 102 of 120
+
Service only one side of the pump at a time to avoid the mixing of
parts.
PC 3001 VARIO pro IK
Disassemble the inlet condenser.
➨
Loosen the union nut at the inlet of the
pump.
➨
Remove the 4 screws affixing the counter
holder of the exhaust vapor condenser with
a Torx driver T10.
➨
Remove the inlet condenser. In doing so
pull the PTFE hose out of the inlet of the
inlet condenser.
PC 3001 VARIO pro TE
Disassemble the emission condenser TE.
➨
Loosen the union nut at the inlet of the emis-
sion condenser TE.
➨
Remove the 2 screws affixing the mounting
plate of the emission condenser TE with a
Phillips screw driver size 2.
➨
Remove the emission condenser TE. In do-
ing so pull the PTFE hose out of the inlet of
the emission condenser TE.
PC 3001 VARIO pro EK Peltronic
Disassemble the Peltronic emission condens-
er. Detach the coupling of the hose connection
at the Peltronic emission condenser.
➨
Open the hose clip with a slotted screw-
driver.
➨
Pull the tubing off the hose connector.
➨
Remove the 2 screws affixing the mounting
plate of the Peltronic emission condenser
with a Phillips screw driver size 2.
➨
Remove the Peltronic emission condenser.
In doing so pull the PTFE hose out of the
inlet of the Peltronic emission condenser.
O