ADC AD-78 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE DATA LABEL
1. MODEL DRYER
The model number is an ADC number which describes the size of the dryer and the
type of heat (gas, electric, or steam).
2. SERIAL NUMBER
The serial number allows ADC to gather information on your particular dryer.
3. MANUFACTURING CODE NUMBER
The manufacturing code number is a number issued by ADC which describes
ALL possible options on your particular model.
4. TYPE OF HEAT
The type of heat describes the type heat for your particular dryer; gas (either natural
gas or liquid propane [L.P.]), or steam.
5. HEAT INPUT (fm GAS DRYERS)
This describes the heat input in British Thermal Units per Hour (BTUH).
6. ORIFICE SIZE (for GAS DRYERSl
Gives the number drill size used.
7. ELECTRIC SERVICE
This describes the electric service for your particular model.
8. GAS MANIFOLD PRESSURE (for GAS DRYERS!
This describes the manifold pressure taken at the gas valve tap.
9. APPLICABLE APPROVAL SEAL(S)
I.E., American Gas Association, Canadian Gas Association.
67