ADLINK ND-6054 - Manual (Page 10)

2 • Introduction
1.2 Overview of NuDAM-6050
1.2.1 What is NuDAM-6050?
NuDAM-6050 is a digital input and output module. The digital input channels
can monitor active TTL signals, and sense passive switch on/off signal
because of the internal pull high resistors. The convenient open collector
output channels can sink up to 50 mA current. Combining with the relay
devices, it is possible to control the high power devices by programming
output channel of the NuDAM-6050.
1.2.2 Features of NuDAM-6050
♦ 7 bits digital input
♦ 8 bits open collector digital output
♦ Programmable host watchdog timer for host failure protection
♦ Internal watchdog timer for device failure protection
♦ Easy programming by software
♦ Easy installation and wiring
1.2.3 Specifications of NuDAM-6050
♦ Interface
• Interface : RS-485, 2 wires
• Speed (bps) : 1200, 2400, 4800, 9600, 19.2K, 38.4K, 115.2K
(115.2K only for firmware reversion above A4.00)
♦ Digital Input
• Channel numbers : 7
• Logical level 0 : +1V maximum
• Logical level 1: +3.5V~30V
• Pull up resister : 10KΩ
• Maximum current : 0.5mA