2 initializing a brand-new module – ADLINK ND-6054 User Manual
Page 53
Initializtion & Installation
• 45
2.2 Initializing a Brand-New Module
2.2.1 Objective of Initializing a Brand-New NuDAM
All NuDAM modules. except NuDAM-6520 and NuDAM-6510, in a RS-485
network must have an unique address ID, however, every brand-new
NuDAM has a factory default setting as following :
♦
Address ID is 01.
♦
Baud rate is 9600 bps
♦ Check-sum
disable
♦
Host Watchdog timer is disable
Therefore, to configure the brand-new NuDAM before using is necessary,
otherwise the address ID will be conflict with others modules because the ID
of new modules are identity . The baud rate may also be changed according
to user‘s requirements.
The following sections show how to initialize a brand-new module, which is
applicable for initializing NuDAM-6050, NuDAM-6052, NuDAM-6053,
NuDAM-6054, NuDAM-6056, NuDAM-6058, NuDAM-6060, and
NuDAM-6063.