8 digital output – ADLINK ND-6054 User Manual
Page 77
Command Set
• 69
3.8 Digital
Output
( 6050, 6060, 6063 )
@Description
Set digital output channel value at specified address. This command is only
available to modules involving the digital output function.
@Syntax
#(Addr)(ChannelNo)(OutData)<CR> (6050,6060,6063 Only)
#
Command leading code. (1-character)
(Addr)
Address ID (2-character)
(ChannelNo)
00 : Set value to all channels
1X : Set value to single channel
First character is 1, Second character is
channel number. (2-character)
(OutData)
Set value to all channels :
Each bit is mapping to each channel number
Set value to single channel :
First character is 0, second character is set to value 0
or 1. (2-character)
@Response
<CR>
or
?(Addr)<CR>
>
Command is valid
?
Command is invalid.
(Addr) Address
ID.
@Example
User command:
#300003<CR>
Response:
><CR>
30 Address
ID
00
Set output to all channels
03
03 (00000011), Channel 0 and 1 are set ON other
channels are set to OFF
User command:
#2F1201<CR>
Response:
><CR>