East Coast Supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit - Manual (Page 13)

29) Re-route injector harness over crossover coolant
tube and re clip harness into fuel rail in factory
location as shown below.
30) Using 3 of the supplied 10mmx30mm bolts, bolt
head unit/power steering pump back plate to drivers
side head as shown. Torque to 37 ft/lbs.
31) Using the supplied hardware mount the
supplied power steering mount being certain
to route the engine harness in between
spacers as shown below. Hardware, from top
to bottom is 10mmx100mm, 10mmx120mm,
and 10mmx110mm. Torque to 30ft/lbs.
32) Re Install Power steering pump to bracket with
factory 13mm hardware. Torque to 18 ft lbs.