East Coast Supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit - Manual (Page 9)

42) Remove lower radiator shroud by pulling
plastic retaining pins, folding edge and pulling it
out the bottom of the car.
43) Trim IAT Sensor mount from Lower radiator
shroud as shown.
44) Drill two holes with supplied drill bit, and
Reinstall IAT sensor to passenger side upper
radiator shroud, as shown, with two supplied self
tapping screws and re install IAT plug wire.
45) Install lower radiator relocation brackets
into factory indents. Leave loose, as they will
be tightened at a later point.
46) Install supplied lower intercooler mount
to the lower radiator support. The bracket
goes under the lip of the frame as shown.