East Coast Supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit - Manual (Page 20)

60) Install Lower S tube from the Head
unit outlet to the 90 degree hose on
the inlet side of the intercooler and
attach to intercooler inlet duct with 4
in T-bolt clamp.
61) Install front blower plate. Upper left is
affixed with 17x10mm bolt, Idler stud
receives washer and nylock nut with 2
allen head cap screws into blower as
shown.
62) Install Idlers with supplied hats to the left of the head unit pulley, and to the right of the crank pulley
as shown.
63) Install the Heavy Duty Supercharger
belt tensioner with provided 15mm
hardware, with slide adjuster in the
threaded hole on the right to provide
maximum adjustability.