East Coast Supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit - Manual (Page 3)

7) With a 15mm socket remove power
steering idler pulley.
8) With a 10mm socket, remove upper
radiator support brackets.
9) Place upper radiator support bracket in vise, and
use hacksaw to remove tabs on back side of
brackets. Repeat for other side. Set aside for
reinstallation of radiator.
10) Taking the supplied upper radiator relocation
brackets, and place a drop of thread locker on the thread
of each Allen head screw. With a 5mm hex key, install
brackets as shown in factory location.