East Coast Supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit - Manual (Page 5)

15) Using a pick tool, or suitable other tool,
remove c-clips retainers from transmission
cooling lines and place in factory provided
bracket on the back of fan assembly. Be sure
to save clips in safe location for reinstallation.
16) Using a 13mm box or ratchet wrench, remove
2 bolts on either side of radiator holding the AC
condenser to the radiator.
17) Using a 10mm socket remove 2 bolts holding
thermostat housing to block. Be sure to have a
pan under car to capture any remaining coolant
install supplied 160 degree thermostat and
reinstall housing.
18) Remove upper radiator air deflector from between
radiator support and ac condenser as shown.
Remove Radiator and fans from car, leaving AC
condenser in vehicle.