East Coast Supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit - Manual (Page 2)

1) Disconnect Battery and then remove engine
cover.
2) Remove radiator Cap, and from under the car
drain coolant by turning radiator drain valve a
quarter turn to the left. Capture coolant in a clean
large container so it may be reused.
3) Unplug and remove MAF sensor from factory
air box by removing the 4, 10mm retaining bolts.
Set aside for reinstallation into charge tube.
4) On Passenger side valve cover remove pcv
breather line as shown.
5) Disconnect EVAP Breather line by pressing down
the white retaining clip with one hand and pulling
line away from intake port.
6) Flipping EVAP breather line over, reverse its
direction as shown. Use a heat gun to make line
flexible enough to straighten the turn if desired.