Echelon IzoT NodeBuilder - Manual (Page 229)

13. Press the service pin on the development platform you to be loaded and commissioned. The IzoT
Commissioning tool loads the application image for your device application to the device and
makes it operational. When the IzoT Commissioning tool is done commissioning, it will return to
the LonMaker drawing. The device shape will be will be solid green indicating that the device has
been commissioned and is online. The device application will not do anything until you test the
device or connect it to other devices.
14. Test your device’s interface using the IzoT Commissioning tool. See Chapter 9, Testing a
NodeBuilder Device Using the IzoT Commissioning Tool, for more information.
15. Debug your device application Debugging a Neuron C Application. See Chapter 10, Debugging a
Neuron C Application, for more information.
Adding a Target Device with the NodeBuilder Project Manager
You can use the NodeBuilder Project Manager to add the devices in any open LonMaker network to
your current NodeBuilder project. To do this, follow these steps:
1. Right-click the Devices folder in the Project pane and click Insert on the shortcut menu.
IzoT NodeBuilder FX User's Guide 215