Echelon IzoT NodeBuilder - Manual (Page 95)

5. If you have previously associated a IzoT CT network with this NodeBuilder project, it appears in
the Project File property.
6. To select a different NodeBuilder project, click the button to the right of the Project File property,
browse to and select your project folder (C:\Users\Public\Documents\LonWorks\OpenLnsCt
\Source\<Project Folder> by default), and then select the project file (.NbPrj extension) in the
project folder.
7. Optionally, you can select the Set as Default Project check box to specify this NodeBuilder
project as the default when the IzoT NodeBuilder tool is started from the IzoT Commissioning
tool.
8. Click Finish.
Copying NodeBuilder Projects
You can copy a NodeBuilder project to another computer using IzoT CT, or by manually copying the
NodeBuilder project files. After you copy a NodeBuilder project, you must also copy any user-defined
resource files used by the device template in the project from the source computer to the target
computer, and then install and register your user-defined resource files on the target computer. See
Copying User-Defined Resource Files for more information on how to do this.
Using the IzoT Commissioning Tool to Backup and Restore a
NodeBuilder Project
You can copy a NodeBuilder project to another computer by backing up the project files on the source
computer and restoring them on the target computer with the IzoT Commissioning Tool. To do this,
follow these steps:
1. Ensure that the source and target computers have the same versions of the IzoT NodeBuilder tool
and the IzoT Commissioning Tool.
2. On the source computer, start the IzoT Commissioning Tool. To do this, click Start on the
taskbar, point to Programs, point to Echelon OpenLNS CT, and then select OpenLNS
Commissioning Tool. The OpenLNS CT Design Manager opens.
IzoT NodeBuilder User's Guide 81