Echelon IzoT NodeBuilder - Manual (Page 64)

6. Right-click the nvoSwitch.state = !input_value line, and then click Toggle
Breakpoint on the shortcut menu, or click anywhere in the line and press F9.
7. A breakpoint marker ( ) appears next to the line, and the line is added to the Breakpoint List
pane at the bottom of the NodeBuilder Project Manager.
8. Press and then release the left button at the bottom of your development board (SW1 on the FT
6000 EVB; IO_6 on the Gizmo 4 I/O Board). Observe that program execution stops at your
breakpoint as denoted by the arrow symbol on top the breakpoint symbol (
).
50 Creating and Opening IzoT NodeBuilder Projects