Echelon IzoT NodeBuilder - Manual (Page 60)

11. Press the service pin on the development platform to be loaded and commissioned. IzoT CT loads
the application image for your IzoT NB Example Device application to the development platform
and makes it operational. When IzoT CT is done commissioning, it will return to the IzoT CT
drawing. The device shape will be will be solid green indicating that the device has been
commissioned and is online. The device application will not do anything until you test the device
or connect it to other devices.
12. Proceed to the next section to test your device’s interface using the IzoT Browser.
For more information on building and downloading device applications, see Chapter 8, Building and
Downloading Device Applications.
Step 6: Testing the Device Interface
The IzoT NodeBuilder tool makes it easy to test your device by itself, as well as to integrate your
device into a network and test its interaction with other devices.
The first tool that you will typically use for testing is the IzoT Browser. The browser displays all the
input and output network variables and configuration properties for your device. You will typically
exercise the hardware or network variable inputs to your device and observe the hardware and network
outputs from your device.
46 Creating and Opening IzoT NodeBuilder Projects