Echelon IzoT NodeBuilder - Manual (Page 45)

• In the Device Class (CC:CC) property, select the Multi-I/O module (5.01) option.
• In the Usage (UU) property, select the General option.
• In the Channel Type (TT) property, select the TP/FT-10 option.
• In the Model Number (NN) property, enter 01.
Note: The current list of manufacturer IDs, device classes, usage values, and channel types
are defined in an XML file (spidData.xml) that is available at
www.lonmark.org/spid . This
file is updated as L ON M ARK International adds new manufacturer IDs, device classes, usage
values, and channel types.
5. Click OK to return to the New Device Template wizard. The Program ID property contains the
program ID you specified in the Standard Program ID Calculator dialog.
Tip: Do not clear the Enable check box under Automatic Program ID Management. This
enables the Model Number (NN) field in the program ID to be incremented automatically when
the external interface of the device is changed. This allows for the easy development of a device
with a changing network interface during development. The program ID will cycle through the
range of specified model numbers to avoid two devices having the same program ID but different
external interfaces.
6. Click Next. The Hardware Template window opens.
7. Specify the development build and release build hardware template.
• If you are using the FT 6000 EVK hardware (FT 6000 EVBs), select FT 6000 EVB in both
the Development Build Hardware Template and Release Build Hardware Template
properties.
IzoT NodeBuilder User's Guide 31