Echelon IzoT NodeBuilder - Manual (Page 73)

10. Press the left button at the bottom of your development board (SW1 on the FT 6000 EVB; IO_6
on the Gizmo 4 I/O Board) repeatedly to test the connection between the nvoSwitch output
network variable of the Left Switch functional block and the nviLamp input network variable of
the Left LED functional block.
Observe that the left LED at the bottom of your development board (LED1 on the FT 6000 EVB;
IO_0 on the Gizmo 4 I/O Board) turns on and off each time you press the left button on your
development board. In addition, the current values of the output and input network variable on the
Connector shape toggle between 100.0 1 and 0.0 0 each time you press the button.
For more information on testing NodeBuilder devices in a L ON W ORKS network, see Chapter 9
Testing a NodeBuilder Device Using the IzoT Commissioning Tool.
IzoT NodeBuilder FX User's Guide 59