Echelon IzoT NodeBuilder - Manual (Page 238)

7. Double-click the Data Point shape for the input network variable, enter a different value, and then
click anywhere outside the Data Point shape. Observe the hardware output change based on the
value you entered for the input network variable.
If the data point has a structured value, you can also set the value by right-clicking the data point
shape and selecting Value Details on the shortcut menu. The Set Network Variable Value
dialog opens. You can set the values for the individual fields in the structure, and then click OK
to save the changes.
If the data point has an enumerated value, you can set the value by right-clicking the data point
shape, pointing to Set Details on the shortcut menu, and then selecting an enumeration from the
list that appears.
For more information on using the Data Point shape in the IzoT Commissioning tool, see Chapter 6 of
the IzoT Commissioning Tool User’s Guide.
Note: If these steps do not generate the expected result, open the IzoT NodeBuilder tool and check
your code. You can also use the NodeBuilder Debugger to help troubleshoot problems (for more
information, see Chapter 10, Debugging a Neuron C Application).
Using the LonMaker Browser
To test your device’s interface with the LonMaker Browser, follow these steps:
1. Open the LonMaker drawing containing your device. See the IzoT Commissioning Tool User’s
Guide for more information on opening LonMaker drawings.
2. Right-click the device in your LonMaker drawing, then click Browse on the shortcut menu.
224 Testing a NodeBuilder Device Using the LonMaker Tool