4 thermal safety, 5 chemical and biological safety – Martin Christ Beta 2-8 LSCplus User Manual

Page 26

Advertising
background image

Beta 1-8 LSC&
Beta 2-8 LSC&

3 Safety

26

Version 04/2013, Rev. 1.1 of 16/12/2013 • sb

Translation of the original operating manual

Pos: 63 / 200 Christ /36 0 GT -BA La bor -Pilot (S TANDARDMODULE) /03 0 Sicher heit/ 030 -00 60- 004 0 The rmisc he Siche rhei t @ 5 \mo d_1 299 136 4649 16_ 68. docx @ 347 40 @ 3 @ 1

3.6.4 Thermal safety

During the operation of the freeze-dryer, the ice condenser can reach
surface temperatures of –85°C depending on the power.

DANGER

• Wear suitable protective gloves when installing or removing

accessories. Do not reach into the ice condenser chamber without this
protection – your limbs may freeze onto the chamber walls!

Pos: 64 / 010 Unive rsalm odul e/ L ee rzeile @ 0\ mod _120 211 624 450 0_0. docx @ 11 4 @ @ 1

Pos: 65 / 010 Unive rsalm odul e/ L ee rzeile @ 0\ mod _120 211 624 450 0_0. docx @ 11 4 @ @ 1

Pos: 66 / 200 Christ /36 0 GT -BA La bor -Pilot (S TANDARDMODULE) /03 0 Sicher heit/ 030 -00 60- 005 0 Ch emisc he u nd biologisc he Sich erh eit @ 5\m od_1 299 136 465 291 _68. docx @ 34 748 @ 3 @ 1

3.6.5 Chemical and biological safety

If infectious, toxic, pathogenic, or radioactive substances are intended to be
dried, it is in the responsibility of the user to ensure that all necessary
safety regulations, guidelines, precautions, and practices are adhered to
accordingly.

DANGER

• Infectious, toxic, pathogenic, and radioactive substances must be dried

in suitable accessories. Take suitable precautions for your own safety!

• Do not dry products with a high solvent concentration or acidic

products without special protective measures or device-based
precautions (e.g. an additional cooling trap to protect the vacuum
pump). It is absolutely necessary to consult the manufacturer in these
cases (see chapter 7.3 - "Service contact").

• Special caution is necessary when handling azides, as a dangerous

explosive develops in combination with copper or nonferrous metals! It
is absolutely necessary to contact the manufacturer (see chapter 7.3 -

"Service contact").

WARNING

• Keep informed about local measures to avoid harmful emissions

(depending on the substances to be dried).

• As personal protective equipment, safety gloves are required for the

use of the freeze-dryer.
The materials to be dried may, however, require additional special
safety measures (e.g. drying of infectious, toxic, radioactive, or
pathogenic substances)

Pos: 67 / 010 Unive rsalm odul e/ Seit enwec hsel @ 0\m od_ 120 211 6244 312 _0. docx @ 10 5 @ @ 1

Advertising
This manual is related to the following products: