Martin Christ Beta 2-8 LSCplus - Manual (Page 52)

Beta 1-8 LSC&
Beta 2-8 LSC&
6 Operation
52
Version 04/2013, Rev. 1.1 of 16/12/2013 • sb
Translation of the original operating manual
• The button with the lock symbol blocks the access immediately and the
system switches to the default setting.
Fig. 43: Access blocked, the data cannot be edited
Operator/maintenance/administrator password: For each of these access
levels, certain editing rights have been defined. They can be enabled with
the corresponding password.
The rights of the various access levels are detailed in the following table.
Action Operator Maintenance Administrator
Editing of the data of the current
process run (e.g. selection of the
operating mode, changing of set
values)
Editing of maintenance functions (e.g.
oil change of the vacuum pump) --
Editing of the default settings (e.g.
editing of the access protection,
creating and editing of programs,
editing of system settings)
-- --
Device options (5)
This dialog box lists all of the device options that are available for the unit in
question. A list of all the possible options can be found in chapter 6.6 -
"Optional extensions" zu finden. Options that require a series-number-
specific release code are marked with the symbol (" ").
Fig. 44: Dialog box “Device options” (example)