Martin Christ Beta 2-8 LSCplus User Manual
Page 70
Beta 1-8 LSC&
Beta 2-8 LSC&
6 Operation
70
Version 04/2013, Rev. 1.1 of 16/12/2013 • sb
Translation of the original operating manual
Pos: 146 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LSCplus/ 060 -00 50- 003 3-0 030 Prog ra mm k opie ren @ 6\ mod _12 991 427 5593 6_6 8.d ocx @ 3673 5 @ 4 @ 1
6.5.3.3 Copying a program
If a new program is to be created based on an already existing program,
the already existing program can be copied. A free program storage
location must be available for this purpose.
• Select the program to be copied from the list in the main window
"Program".
• Press the button with the program name in order to call up a window
with the program data.
• Press the button “Copy program” in order to create a copy of the
existing program.
• Edit and save the copy (see chapter 6.5.3.1 - "Creating a program").
• Close the dialog box by pressing the “Program” button.
The program will be automatically assigned to the first free program storage
location.
Pos: 147 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 148 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LSCplus/ 060 -00 50- 003 3-0 040 Prog ra mm la den @ 6\ mo d_1 2991 427 562 79_ 68.d ocx @ 367 43 @ 4 @ 1
6.5.3.4 Loading a program
If a freeze-drying process is to be executed and controlled by a program,
the program must be loaded.
• Call up the main window "Program". This window includes a list of all
the programs that are saved.
• Press the button "Load" behind the program name. A dialog box will be
displayed in which the start section, the start time or the start
temperature can be adapted to any specific needs. The "Info" button
can be used to call up a brief description of the active program,
including information concerning the remaining runtime and the end of
the program.
Fig. 66: Dialog box "Load program"
• Press the button "Load" in order to accept the program data. The
display switches to the standard user interface.
• Press the button "Program start" in order to start the freeze-drying
process.