Martin Christ Beta 2-8 LSCplus - Manual (Page 39)

Beta 1-8 LSC&
Beta 2-8 LSC&
6 Operation
Version 04/2013, Rev. 1.1 of 16/12/2013 • sb
39
Translation of the original operating manual
The user interface is divided into four main windows that can be called up
by touching the corresponding buttons:
Manual
This window is also the standard user interface. It is used to control the
freeze-drying process manually.
Program
This area is used to create and execute programs for automating the
freeze-drying process and for making it reproducible. This function is only
available in combination with the programmer module PGM
plus
option.
Options
This window is used for personalised settings that enable the users to
adapt the system as far as possible to their respective area of activity.
?
In this window, the users can find all of the relevant information concerning
the control system at a glance. In the event of enquiries at the factory,
these data facilitate the assignment and expediting of the processing of the
enquiries.
Pos: 125 /01 0 Univ ersal mod ule/ Lee rzeile @ 0\ mo d_12 021 162 445 00_ 0.doc x @ 1 14 @ @ 1
Pos: 126 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LSCplus/ 060 -00 50- 001 0-0 010 Hau ptfe nster Ma nuell Lab or @ 6\ mod_ 129 914 275 071 7_6 8.doc x @ 3 666 3 @ 4 @ 1
6.5.1.1 Main window "Manual"
This main window shows all of the relevant process data. Here, the
individual phases of a freeze-drying process can be controlled manually.
1 Status line
2 Set process values
3 Button "Set values:
view/edit"
4 Actual values of the
current process
5 Button "Tools"
6 Button "Schematic
system diagram"
7 Button "Process- and
equipment messages"
8 Button "Operating
mode: select/start"
9 Button "Stop"
Fig. 22: Overview of the main window "Manual"