Pitney Bowes RISO ComColor Printer - Manual (Page 10)

8
ComColor Series User’s Guide 03
h Main Power Switch
Use to turn the main power ON and OFF. Usually the power
is left ON.
When the high capacity feeder is connected, use
its main power switch. For details, see "High
Capacity Feeder (optional)" (p. 10).
i Scanner Socket
Use to connect the scanner power cord.
j Main Unit Socket
Use to connect the main unit power cord.
k Standard Tray Descent Button
Use to move the standard tray up or down when
replacing or adding paper to it.
l Feed Tray
Set the paper to be used for printing here. Special paper
such as thick paper cannot be set.
m USB Port
Use to connect a USB flash drive to save scanner data or
to output print jobs saved in a USB flash drive.
Use USB flash drive compatible with Mass
Storage Class and USB 1.1 or 2.0 specifications.
n Scanner (Optional)
Use to copy or scan documents that are read from the
platen glass or the ADF.
o Scanner Lamp (green/red)
Lights up in green when the scanner is ready to be used.
Flashes in green when starting up or while reading, and
flashes in red when an error occurs.
p Platen Glass
Set the original face down and aligned with the position
of the arrow in the top left.
q Original Cover
Pull down to cover the original when reading it on the
platen glass.
r Automatic Document Feeder (ADF)
Up to about 100 originals can be automatically fed.
s ADF Original Unit Lever
Pull this lever up to open the original unit cover when
originals are jammed.
t ADF Original Guide
Slide to fit the width of the original.
u ADF Original Output Tray
Documents that are read from the ADF are output here.
v Scanner Power Switch
Use to turn the scanner power ON and OFF. Usually the
power is left ON.