Pitney Bowes RISO ComColor Printer - Manual (Page 67)

1-27
Basic Settings
1
ComColor Series User’s Guide 03
■ Face up/down
Specify whether to output printouts face-up or
face-down to the tray.
[Face-up], [Face-down]
Specify this when you have set the output tray to
[Stacking tray] or [High capacity stacker].
● Save/Call setting
The current settings on the printer driver screen
can be saved and retrieved later as needed. See
"Save/Call setting" (p. 1-11) in "[Basic] tab" for
details.
[Advanced] Tab
● Copies
Enter the number of copies (1 to 9999) to print.
When program has been configured, you cannot
enter the number of copies.
● Print and pause
When printing an original with a large number of
pages or sheets, the first page or first set is printed
(except for the specified number of sheets), printing
stops to allow you to check the printout, and then
printing can be resumed. After you check the
printout, press the [START] key on the printer to
continue printing. Select the check box to enable
this setting.
● [Print and pause] proceeds according to the
print unit ([Group] or [Sort]) selected with
[Collate]).
● After checking the printout, you can change the
settings on the operation panel of the printer.
(p. 4-6 "Changing Settings During Printing" in
"Printer")
● Program
This function is useful when distributing different
numbers of copies to multiple groups. You can
configure up to 60 groups.
Select the [Program] check box and click [Details] to
display the [Program] dialog box. Specify the number of
copies and sets for each group.