Pitney Bowes RISO ComColor Printer - Manual (Page 14)

12
ComColor Series User’s Guide 03
High Capacity Stacker (optional)
If the optional high capacity stacker is connected, you can stack approximately 4,000 sheets (plain paper,
recycled paper). You can retrieve the output printouts with the carriage.
a Stacking Tray Descent Button
Press to remove printouts from the stacking tray. If you
press the stacking tray descent button, the stacking tray
lowers to the bottom (the position of the carriage). The
stacking tray stops when you press the stacking tray
descent button during lowering. If you press the button
again, the stacking tray continues lowering. The stacking
tray does not operate during printing even if you press
the stacking tray descent button. Press with the right and
left covers closed.
b Right Cover
Open this cover to remove printouts, to set a carriage, or
to remove a jammed paper.
c Paper Guide
Use to prevent output printouts from becoming
misaligned.
d Corrugator
Set to feed paper smoothly according to the paper type
and align printouts to stack neatly.
e Carriage
Set inside the high capacity stacker. Connect the
stacking tray to the carriage to move high-volume
printouts.
f Stacking Tray
Printouts are output here.
g Left Cover
If paper jamming occurs during paper transfer, open this
cover and remove the jammed paper.
h High Capacity Stacker Socket
Use to connect the high capacity stacker power cord. The
socket is located to the bottom of the back of the left
cover.
● Do not open the cover during printing. You
cannot print with the cover open.
● The type of carriage you can use is the
genuine carriage for the high capacity stacker.