Pitney Bowes RISO ComColor Printer - Manual (Page 127)

2-49
Copying Functions
2
ComColor Series User’s Guide 03
● Configuring the Output Side
Specify whether to output printouts face-up or face-
down to the tray.
[Face-up], [Face-down]
Specify this when you have set the output tray to
[Stacking tray] or [High capacity stacker].
Paper guide control
Adjust the position of the paper guides of the
optional auto-control stacking tray or high capacity
stacker.
■ Automatic paper guide adjustment
Normally, select [Auto].
[Auto]
The position of the paper guides is adjusted
automatically to fit the paper size.
■ Manual paper guide adjustment
You can widen or narrow the paper guides beyond
the position set automatically.
You can adjust the side and end paper guides
separately.
[Wider]
Each time you press the button, the paper guides
move 1 mm (0.04") toward the outside of the stacking
tray.
[Narrower]
Each time you press the button, the paper guides
move 1 mm (0.04") toward the inside of the stacking
tray.
You can also use the paper guides open button on
the auto-control stacking tray when manually
removing paper from the tray.
See "Stacking Tray (optional)" (p. 11) in "Part
Names and Functions" for details on using the
paper guide open button on the auto-control
stacking tray.
1 Press [Functions] on the copy
mode screen.
2 Press [Paper guide control].
The [Paper guide control] screen is displayed.
3 Adjust the positions of the paper
guides.
The paper guide adjustment values are displayed
on the screen.
• To reset the adjustment value to 0 mm, press
[Auto].
• The adjustment value is also reset to 0 mm
when the power is turned off, the [RESET] key
is pressed, or the paper size is changed.
4 Press [Close].
The settings are confirmed and the previous
screen is displayed.