Pitney Bowes RISO ComColor Printer - Manual (Page 39)

37
Print Preparations
ComColor Series User’s Guide 03
3 Close the right cover of the high
capacity stacker.
If you pulled out the carriage in step 2, place the
carriage to the high capacity stacker, and close
the right cover.
If you specify [Do not lower stacking tray.] in [High
capacity stacker], and if paper is on the stacking
tray, the paper guides cannot move. Therefore,
the paper guides cannot adjust to the paper size
of the next job. If you print jobs of different sizes,
setting direction and feed options, remove paper
from the stacking tray and proceed to the next
print.
Placing the Stacking Tray in the
Carriage
You can remove the stacking tray from the carriage.
To remove printouts along with the stacking tray,
place the tray in the carriage, and return the tray
along with the carriage to the high capacity stacker.
1 Align the (two) screws on the
carriage's handle root to the end of
the stacking tray.
2 Fit the holes of the stacking tray
on top of the knobs on the
carriage.