Pitney Bowes RISO ComColor Printer - Manual (Page 114)

2-36
2 Copy
ComColor Series User’s Guide 03
■ Slip sheet
Specify how slip sheets are inserted.
[OFF]
Do not insert a slip sheet.
[Between sets]
Insert a slip sheet between sets.
[Between groups]
Insert a slip sheet between groups.
[Select tray]
When you select [Between sets] or [Between groups],
specify the feed tray set in [Slip sheet].
■ Number on slip sheet
[ON]
Stamp the group number and set number when set to
[Between sets], and stamp the group number when
set to [Between groups].
[OFF]
Do not stamp numbers.
You cannot use this function with [Collate/slip
sheet] on the [Functions] screen.
■ Offset output
Stack each print job shifted apart from one another.
[OFF]
Do not shift each print job apart from one another.
[Between sets]
Stack each print set shifted apart from one another.
[Between groups]
Stack each print group shifted apart from one another.
A multifunction finisher, face down offset stapler or
high capacity stacker is required to use this
setting.
● Configuring the Program
Configure new settings (copies, sets, etc.) for each
group (01G to 60G).
1 Press [Functions] on the copy
mode screen.
2 Press [Program].
The [Program (1)] screen is displayed.
3 Enter the number of copies and sets.
Press the input box and enter the number using
the numeric keys.
After you enter the number of copies and sets, the
total number of copies is displayed.
• To clear the fields, press the [Clear] key.
• Press the [
∗] key to enter a number in the next
input box.
• Press [S] and [T] to scroll the list.
To use the settings without saving them, go to
Step 4. To save the settings, go to Step 3 in
"Saving a Program".
4 Press [Next].
The [Program (2)] screen is displayed.