Pitney Bowes RISO ComColor Printer - Manual (Page 126)

2-48
2 Copy
ComColor Series User’s Guide 03
4 Select the binding side.
5 Specify [Separate books].
6 Enter the center margin value.
• Press the input box and enter the number using
[S] and [T] or the numeric keys.
• To clear the fields, press the [Clear] key.
• If part of the printing area is missing due to the
center margin setting, press [Auto reduce].
7 Press [OK].
The settings are confirmed and the previous
screen is displayed.
Output tray
Specify the output tray for the copies and output
tray relay settings.
An optional multifunction finisher or stacking tray
is required to use this setting.
● Selecting the Output Tray
Select the output tray for printouts.
[Auto]
The appropriate tray is selected automatically. When
"Output tray relay" is set to [ON], select [Auto].
Output tray for optional equipment
Select the output tray.
The buttons displayed on the [Output tray] screen
varies depending on the optional equipment
connected.
1 Press [Functions] on the copy
mode screen.
2 Press [Output tray].
The [Output tray] screen is displayed.
3 Select the output tray.
4 Press [OK].
The settings are confirmed and the previous
screen is displayed.
● Configuring the Output Tray
Relay Setting
Switch the output tray automatically when the tray
is full.
Select from the following.
[ON], [OFF]
● An optional multifunction finisher, high capacity
stacker or auto-control stacking tray is required
to use this setting.
● [Output tray] must be set to [Auto], and
[Collate] must be set to [Group].
1 Display the [Output tray] screen.
Follow Steps 1 to 3 in "Selecting the Output Tray".
2 Press [ON] for [Output tray relay].
3 Press [OK].
The settings are confirmed and the previous
screen is displayed.