Pitney Bowes RISO ComColor Printer - Manual (Page 49)

1-9
Basic Settings
1
ComColor Series User’s Guide 03
■ Using This Function with Duplex
Printing
When using this function with duplex printing, you can set
the binding position for each paper size.
Select the [Mixed size original] check box and click
[Details], and the [Details] dialog box is displayed. Select
the binding position for each size-mixed page.
[Smaller page]: Long edge / Short edge
[Larger page]: Long edge / Short edge
When you select the [Rotate larger page 180 degrees]
check box, the larger page rotates 180 degrees.
● [Larger page] means A3, B4 (Ledger, Legal),
and Tabloid; [Smaller page] means other sizes.
● Some applications do not allow you to rotate
the larger page to the desired orientation. In
this case, select the check box, and you can
rotate the print orientation 180 degrees.
● Zoom
Specify the enlarge/reduce ratio of the original.
Select the [Zoom] check box and enter the enlarge/
reduce ratio from 50% to 200%.
When the [Zoom] check box has not been selected, the
enlarge/reduce ratio is selected automatically according
to the [Original size] and [Paper size] settings.
● Paper size
Specify the size of paper for printing.
Select from the following.
[A3W], [A3], [A4], [A5], [A6], [B4], [B5], [B6],
[C4], [C5], [C6], [DL-R], [Envelope 1], [Envelope 2],
[No.10 envelope], [Foolscap], [Tabloid], [Ledger],
[Legal], [Letter], [Statement], [custom], [Same as
original]
When printing on envelopes, it is recommended
you install an optional stacking tray.
This pull-down menu shows the sizes registered
with [Custom paper entry] on the [Environment]
tab. (p. 1-34 "Custom paper entry")
■ Specifying a Custom Paper Size
When the paper is a non-standard size, select [custom].
1 Select [custom] for [Paper size].
The dialog box for specifying the custom size is
displayed.
2 Enter the size of the paper.
Specify a width between 90 mm (3 9/16") and
340 mm (13 3/8").
Specify a length between 148 mm (5 13/16") and
550 mm (21 5/8").
3 Click [OK].
• To cancel the settings, click [Cancel].
The size entered here is only valid when
configuring the paper size. Registering frequently
used paper sizes can be useful. (p. 1-34 "Custom
paper entry")