Operation panel – Pitney Bowes RISO ComColor Printer User Manual
Page 16
14
ComColor Series User’s Guide 03
Operation Panel
Various operations and settings can be performed using the operation panel.
You can also identify the machine status or errors such as paper jamming from the lamp colors and whether
the lamps light up or flash.
a
Power Schedule Lamp
Lights up when you set the "Power schedule".
b
Main Power Lamp
Lights up when the main power is "ON".
c
Wake Up Key
Lights up when the machine is in the backlight OFF or sleep
status. Then, press to make the machine ready for operation.
Press to enter the power saving mode manually after a
job is finished.
d
Sub Power Key
Use to turn the power ON and OFF. Lights up when the
power is ON. To switch to OFF, press and hold.
e
Interrupt Lamp
Lights up during copy interrupt.
f
RESET Key
Press to return the settings to their default values.
g
Interrupt Key
Press to temporarily stop the job that is in progress and
execute a different job.
h
STOP Key
Press to stop the job that is in progress.
i
START Key
Press to start an operation.
j
Start Lamp
Lights up when the START key is ready to be used.
k
Error Lamp
Flashes when an error occurs.
l
Clear Key
Press to clear letters or numbers that have been entered.
m
Data Receive Lamp
Flashes when data is being received.
n
Numeric Keys
Press to enter numbers.
If you press the
key, the copy/scanner mode
setting registration screen appears.
o
Touch Panel
Use to perform operations or settings.
This panel also displays information such as error
messages and confirmation messages (p. 15 "Touch
Panel").
p
Counter Key
Press to switch into the meter display screen. The print
and copy sheet limits as well as the number of used and
remaining sheets are displayed. You can print out
displayed information and save it in a USB flash drive.
For details on the meter display screen, see "[Meter
display] Menu"(p. 5-7) in "How to Use Useful Functions".
q
Function Keys
Use as shortcut keys for moving to the mode by
registering modes or functions. They are registered in the
"Admin. Settings".
r
MODE Key
Press to switch to the mode screen.