Pitney Bowes RISO ComColor Printer - Manual (Page 35)

33
Print Preparations
ComColor Series User’s Guide 03
2 Add paper.
■ If you add many sheets
Press and hold the standard tray decent button to
lower the standard tray to the bottom, and you can
load more sheets.
The position to which the standard tray lowers
when paper runs out or when you press, not hold,
the standard tray descent button varies depending
on the "Admin. Settings". If you want to change
the downward position of the standard tray,
contact the administrator.
Preparing the Stacking Tray
(optional)
Set up the stacking tray as follows. Depending on
the size or type of paper for printing, also adjust the
paper arranger at this time.
● The auto-control stacking tray is shown in this
illustration.
● When using the wide stacking tray, manually
adjust the paper guides' (side and end)
positions to fit the paper size.
1 Open the stacking tray until it
stops.
2 Lift the paper guides (side) to
stand them upright.
3 Adjust the paper arranger.
Normally, the paper arranger should be extended
when printing on paper that is B4 size or smaller.
How paper is stacked after printing varies
depending on stiffness and other factors. Adjust
the arranger as needed.
4 Lift the paper guide (end) to stand
it upright.
● For auto-control stacking tray.
Fold all paper guides when printing on paper
larger than 320 × 432 mm (12 1/2" × 17").
● For the wide stacking tray.
Set the tray to a different position, when
printing on paper larger than A3 or Ledger.
See the instruction label on the machine.