Pitney Bowes RISO ComColor Printer - Manual (Page 54)

1-14
1 Printer Driver
ComColor Series User’s Guide 03
● Rotate
Specify this option when rotating the original.
Select from the following.
[Auto], [0 degree], [90 degrees], [180 degrees],
[270 degrees]
When [Auto] has been selected, the print orientation is
set automatically according to the orientation of the
original data and the orientation of the paper loaded in
the input tray. Normally, select [Auto].
● To align the print orientation with an envelope
or other paper with a fixed feeding direction,
specify the angle of rotation.
● [Auto] may be the only option available
depending on the size of the original, the size
and orientation of the paper loaded in the tray,
and the settings of an optional multifunction
finisher.
● Image position
You can adjust the print position ± 20 mm (13/16")
up, down, left, or right. When performing duplex
printing, the front and back sides are adjusted
separately.
Select the [Image position] check box and click [Details]
to display the [Image position] dialog box.
Select the side to adjust and enter the desired value in
the input box.
[Front Side]
Adjust the position of the front side.
[Back Side]
Adjust the position of the back side.
Clicking [Reset] resets all values to zero.
● Save/Call setting
The current settings on the printer driver screen
can be saved and retrieved later as needed.
See "Save/Call setting" (p. 1-11) in "[Basic] Tab" for
details.