Pitney Bowes RISO ComColor Printer - Manual (Page 96)

2-18
ComColor Series User’s Guide 03
Copying Functions
This section describes the copy functions that are configured with the [Functions] screen.
You can register frequently used functions to the [Basic] screen or the [Selections] screen. (p. 2-17 "Direct Access
entry", p. 2-17 "Selections entry")
Press [S] and [T] scroll the
list.
Save as default
Register the current settings to each user as a
personal default value.
This activates only in an environment where login
is necessary, and this button is not displayed in an
environment where login is not necessary.
1 Press [Functions] on the copy
mode screen.
2 Press [Save as default].
The current settings are registered as the login
user's default values.
3 Press [OK].
The previous screen is displayed.
On the [Check setting] screen, you can print the
current default or clear the default values.
Check setting
Confirm the copy mode settings and print the
settings information. You can also register the
current settings as the default values and restore
the default values set by the administrator.
The user who is logged in can register or clear the
user's own default values when [Login setting] has
been set to [Required]. Only administrator can
register or clear the common use default values
when [Login setting] has been set to [Not
required].