Pitney Bowes RISO ComColor Printer - Manual (Page 29)

27
Print Preparations
ComColor Series User’s Guide 03
■ Power-saving features
If you leave the machine unattended for some time, it
automatically goes to power saving mode according
to the "Admin. Settings".
The power saving mode has backlight off and sleep
states. In the "Admin. Settings", set the time the
machine enters each state and the power
consumption value.
When the power saving mode turns on, the touch
panel turns off, and the [Wake up] key turns on.
When you press the [Wake up] key, the power saving
mode is canceled, and the machine recovers.
The machine takes longer to recover from sleep state
than from backlight off state.
Cautions when setting [Power consumption (in
sleep)] to [Low]:
● The RISO Console is not displayed in sleep
state.
● If you print on a network where wake on LAN
does not work, the printer does not wake up
automatically. Set "MAC address" in the printer
driver's [Environment] tab. ("Configuring the
MAC Address" on p. 1-33)
* The function that turns on the machine's sub
power via LAN
Loading Paper
Load paper in the feed trays and the standard tray.
We recommend loading the feed trays with types
of paper you will use most often.
Use the standard tray for the following types of
paper.
• Thick paper and other special paper
• Preprinted paper
• Postcards
• Envelopes
For details, see
" Printing Paper" in the "Safety
Information".
● In the Feed Trays
1 Pull a tray out, toward the front.
2 Push the right side of the locking
lever (in back) to free. Holding the
front tab, spread the guides fully
apart.
3 Move the stopper to make space.
Hold the stopper from both sides and move it out
of the way.